# DSV4 Inference Kernel

## ⚠️⚠️⚠️ CRITICAL: TMA Partition Tensor Mode Ordering ⚠️⚠️⚠️

**THIS BUG COST US AN ENTIRE DAY. READ THIS. BURN IT INTO YOUR BRAIN.**

After `cpasync.tma_partition()`, the output GMEM tensor has **4 modes** (verified on B200):

```
tBgK shape: (((64, 128), 1), ?, KV_tiles, ?)
                 mode 0      1  2        3
```

**Mode 2 is the GMEM tile dimension.** The dimension you index with `kt` to load different K/V tiles.

### THE WRONG WAY (what we did — silently loads from tile 0 forever):

```python
# ❌❌❌ (None,None,0,0) KEEPS MODES 0,1 FREE, SETS MODE 2 TO 0 ❌❌❌
# Mode 2 (the KV tile dim) gets collapsed to coordinate 0.
# TMA ALWAYS reads from tile 0.
tBgK = tBgK[(None, None, 0, 0)]  # ← WRONG! Mode 2 pinned to 0!

# The copy "works" but kv_coord indexes mode 1 (inner GEMM K, not KV tiles).
cute.copy(tma_k, tBgK[(None, kv_coord)], ...)  # ← kv_coord indexes wrong mode!
```

### THE RIGHT WAY (verified on B200 at n=128 and n=256):

```python
# ✅ (None,0,None,0) keeps modes 0 and 2 free → 2D tensor
# Mode 2 (KV tiles) survives as the second mode.
tBgK = tBgK[(None, 0, None, 0)]

# ✅ [None, kt] indexes the surviving mode 1 (originally mode 2 = KV tiles)
cute.copy(tma_k, tBgK[None, kt], ...)
#                       ^^ THIS IS THE KV TILE DIM
```

**Verified shapes on B200 (May 22, n=256, inside @cute.kernel):**
```
Before slice: tBgK = (((64,128),1), Int32(?), Int32(?), Int32(?))  — 4 modes
After (None,0,None,0): tBgK = (((64,128),1), Int32(?))             — 2 modes
```

### WHY THIS IS SO INSIDIOUS

1. **No error, no warning.** The slice `tBgK[(None,None,0,0)]` silently sets mode 2 to 0.
2. **Single-tile (n=128) works perfectly.** With only 1 KV tile, mode 2 is size 1, so the bug is invisible.
3. **Multi-tile tests produce "reasonable" output.** The TMA loads from tile 0 every time, so you get a valid (but wrong) attention computation. Cosine similarity is 0.7-0.9, not NaN.
4. **The strides are all 0.** Printing `tBgK.layout.stride` shows all zeros for TMA tensors. You can't detect the bug from strides alone.
5. **`cute.printf` shows `kv_coord=0`.** We thought the JIT was constant-folding the variable. It wasn't — the variable was fine, but it was indexing the wrong mode.
6. **The 8-mode theory was wrong.** We assumed tma_partition produced 8 TMA coordinate dimensions. It produces 4. The 8-None no-op slice fails with "weakly congruent" at JIT compile.

### THE LESSON

**PRINT THE SHAPES. ALWAYS.** Run `print(f"tBgK: shape={cute.shape(tBgK)}")` inside `@cute.kernel` at trace time. The shapes are your ground truth. Reasoning about mode counts without evidence is how we wasted a day.

**The correct pre-slice depends on which mode is the GMEM tile iteration axis.** For our `local_tile` + `partition_B` + `group_modes(0,3)` pattern, mode 2 is the KV tile axis. `(None,0,None,0)` keeps it free. `(None,None,0,0)` collapses it to 0.

```python
# ALWAYS verify the shape at trace time:
print(f"tBgK shape: {cute.shape(tBgK)}")  # 4 modes
print(f"tBgK after slice: {cute.shape(tBgK[(None,0,None,0)])}")  # 2 modes

# Then index the 2D tensor:
cute.copy(tma_k, tBgK[None, kt], ...)
```

**IF YOU USE (None,None,0,0) INSTEAD OF (None,0,None,0), MULTI-TILE TMA WILL BE SILENTLY BROKEN.**

---

## Architecture

DSV4 is **not MLA**. It uses **CSA (Compressed Sparse Attention, m=4)** and **HCA (Heavily Compressed Attention, m′=128)**. KV latent is (T, 512) shared across all 128 heads. Sink weights merge sparse + SWA attention. vLLM misnames this as "MLA" — it is not. The architecture is fundamentally different.

```
DSV4 inference pipeline — component status
==========================================

Legend:
 [✓] built and tested
 [~] partial — reference or seam exists, native pending
 [✗] to build


 ┌────────────────────────────────────┐
 │ [✗] Embedding + mHC init          │
 │ token embed + n_hc=4 streams      │
 └────────────────┬───────────────────┘
                  │
                  ▼
┌─ Transformer layer × L ──────────────────────────────────────────────┐
│ HCA on layers 0–1 of Pro, alternating CSA / HCA after              │
│                                                                      │
│ ┌─ Attention sub-block ──────────────────────────────────────────┐  │
│ │ [✓] Residual mHC pre + post mix                               │  │
│ │ [~] Norms + RoPE             RMSNorm + partial RoPE           │  │
│ │ [✓] Q / KV projection        NVFP4 linears + LoRA             │  │
│ │ [✓] Token compressor         CSA m=4 / HCA m′=128             │  │
│ │ [✓] Indexer + top-k          CSA, FP32 dot + top-k             │  │
│ │ [~] FMHA core                QK → online softmax → PV         │  │
│ │                              + SWA branch + sink merge         │  │
│ │ [✓] Output projection        inv RoPE + wo_a grouped + wo_b   │  │
│ └────────────────────────────────────────────────────────────────┘  │
│                                                                      │
│ ┌─ FFN sub-block ────────────────────────────────────────────────┐  │
│ │ [✓] Residual mHC pre + post mix                               │  │
│ │ [✓] Pre-FFN norm              RMSNorm                          │  │
│ │ [✓] Router                    sqrt(softplus) + topk + hash     │  │
│ │ [✓] Routed MoE               fused SwiGLU L1 + L2             │  │
│ │ [✓] Shared expert            NVFP4 single-group GEMM          │  │
│ └────────────────────────────────────────────────────────────────┘  │
└──────────────────────────────────┬───────────────────────────────────┘
                                  │
                                  ▼
┌──────────────────────────────────────────────────────────────────────┐
│ [✗] Final RMSNorm → [✗] LM head → [✗] MTP (depth=1) → [✗] Sampler │
└──────────────────────────────────────────────────────────────────────┘

┌─ Supporting infrastructure ──────────────────────────────────────────┐
│ [✗] KV cache management                                             │
│ • state cache: SWA window + uncompressed tail per layer             │
│ • classical paged cache: lcm(m, m′) = 128 tokens per block         │
│ • heterogeneous layout per layer                                    │
└──────────────────────────────────────────────────────────────────────┘


Summary
-------
 Built  [✓] : 9 — mHC ×2, Q/KV proj, output proj, routed MoE,
               shared expert, token compressor, indexer+topk,
               router, pre-FFN norm
 Partial [~] : 3 — norms+RoPE, FMHA core
 To build [✗] : 6 — embedding+init, final norm, LM head, MTP, sampler, KV cache
```

---

## Status (May 23, 2026 — 05:30 UTC)

| Stage | Status | Description |
|-------|--------|-------------|
| A | ✅ COMPLETE | Q@K^T via tcgen05.mma → TMEM → GMEM |
| B | ✅ COMPLETE | QK → identity softmax → P@V pipeline (TMEM alias, KV-tile interleaving) |
| C | ✅ MIGRATED TO MODULE | Real online softmax + normalize. n=128 cos 0.973. Migrated to `dsv4/kernels/attention/fmha.py` as `FmhaKernel`. TMEM layout mismatch still present (3% error). |
| D1 | 🟡 MOSTLY DONE | Parameterized HEAD_DIM. TMEM-P hd=64 works (cos 0.973). SMEM-P for hd>64 is a stub (make_tiled_copy_C rank mismatch). tOrP0 TMEM column offset bug fixed. |
| D2 | TODO | Multi-query grid with head packing (128 Q heads, MQA) |
| D3 | TODO | SWA sequence length mask (swa_lens per batch) |
| D4 | TODO | Causal mask on SWA branch only |
| D5 | 🟢 D5a+D5b DONE | D5a: normalize flag + LSE output (err=0.0). D5b: Python SWA+sink merge (cos 0.961). D5c/D5d: fused kernel merge TODO. |
| E1-E7 | TODO | Production extraction (class, custom op, cache, cleanup) |

---

## Package Structure

```
dsv4/
├── kernels/          Pure GPU code (CuTeDSL @cute.jit, .cu files)
│   ├── gemm/           NVFP4 MoE GEMM kernels (grouped, fused_swiglu, dense, scheduler)
│   ├── attention/      FMHA kernel — FmhaKernel (hd=64, TMEM-P proven; SMEM-P stub for hd>64)
│   ├── compressor/     CSA/HCA token-level compressor (CuTeDSL, 419 lines)
│   ├── indexer/        CSA indexer — score+topk (FP32 dot products, top-k selection)
│   ├── router/         Dense router decode kernel (warp-specialized persistent GEMM)
│   ├── cache/          Cache kernels — append_swa (write KV to split state cache layout)
│   ├── decode/         Decode-time attention (sparse, SWA — future)
│   └── cuda/           Raw .cu files (deinterleave_quantize, sparse_topk_metadata)
├── ops/              PyTorch ↔ kernel bridges
│   ├── quantize.py      BF16 ↔ NVFP4 conversion, scale factors
│   ├── layouts.py       Scale swizzle, gate/up interleave, K-major, offsets
│   ├── gemm_runner.py   Warmup, compile, run grouped/fused GEMMs
│   ├── custom_ops.py    torch.library.custom_op registrations
│   ├── decode_sparse.py native_sparse_decode dispatcher
│   ├── decode_swa.py    native_swa_decode dispatcher
│   ├── rope.py          Forward + inverse RoPE
│   ├── topk.py          Python wrapper for sparse_topk_metadata.cu
│   ├── topk_select.py   Top-k selection wrapper
│   └── router.py        Router op bridge
├── layers/           nn.Module-style components
│   ├── linear.py        Nvfp4Linear
│   ├── grouped_linear.py Nvfp4GroupedLinear
│   ├── moe.py           Nvfp4MoE
│   ├── shared_expert.py Nvfp4SharedExpert
│   ├── mhc.py           mHCLayer
│   ├── attention.py     DSV4 attention sub-block (CSA/HCA/SWA variants, 245 lines)
│   ├── norm.py          RMSNorm (PyTorch ref, fused kernel later)
│   ├── router.py        Router — token-to-expert assignment (273 lines)
│   ├── embedding.py     Token embedding + mHC init (stub)
│   └── ffn.py           FFN sub-block
├── model/            Model assembly
│   ├── config.py        Model config
│   ├── layer.py         Transformer layer
│   ├── layer_schedule.py Layer scheduling
│   ├── mtp.py           Multi-token prediction
│   ├── sampler.py       Token sampler
│   └── dsv4.py          Full model (stub — Phase 1)
├── cache/            KV cache infra
│   ├── allocator.py     Cache memory allocator
│   ├── block_table.py   Paged cache block table
│   ├── flush.py         Cache flush
│   ├── handle.py        Cache handle
│   ├── manager.py       Cache manager
│   ├── paged_cache.py   Paged KV cache
│   ├── prepare_forward.py Forward prep
│   ├── schema.py        Cache schema
│   └── state_cache.py   State cache (SWA ring buffer)
├── loader/           Checkpoint I/O
│   ├── hf_checkpoint.py HuggingFace checkpoint loader
│   └── layout_convert.py Weight layout conversion
└── reference/        Slow PyTorch oracles (never imported by production code)
    ├── attention.py     RoPE, KV cache, causal attention, SWA
    ├── csa_attention.py CSA/HCA sparse attention
    ├── compressor.py    Compressor PyTorch example
    └── moe_pipeline.py  MoE pipeline reference
```

**Mental model:** `kernels/` → `ops/` → `layers/` → `model/` (dependency flows left to right). `reference/` and `loader/` are sidecars.

---

## Active Test Files

### FMHA (Stages A/B/C/D1) — in `tests/unit/`

| File | Stage | Status |
|------|-------|--------|
| `test_fmha_v3.py` | A+B | ✅ Full QK→identity softmax→PV, cosine 0.999999 |
| `test_fmha_v3_12w.py` | A+B | ✅ 12-warp QK→PV, cosine 0.999999 |
| `test_fmha_v3_stage_c.py` | C | ✅ Real online softmax + normalize, n=128 cos 0.973. **Also in module as `FmhaKernel`.** |
| `test_fmha_v3_stage_d1.py` | D1 | 🟡 Parameterized hd, hd=64 PASS (cos 0.973), hd>64 FAIL (SMEM-P stub) |
| `test_fmha_v3_stage_d5b.py` | D5b | ✅ Python SWA+sink merge (cos 0.961, LSE err=0.0) |
| `test_d1_*.py` | D1 | 🔨 Debug/diagnostic variants (hd512, regression, sweep, raw, debug) |
| `test_paired_epilog.py` | C | ✅ Paired atom epilogue experiments |
| `test_pv64_with_softmax.py` | B | ✅ (128,64) PV, single AB pipeline |
| `test_128_128_vdiag.py` | A+B | ✅ (128,128) PV baseline |
| `test_qkonly.py` | A | ✅ QK with split Q/KV pipelines |
| `test_qk_softmax.py` | A+B | ✅ QK + identity softmax, no PV |

### MoE / GEMM — in `tests/unit/`

| File | What |
|------|------|
| `test_cutedsl.py` | NVFP4 grouped GEMM kernel |
| `cudagraph_test.py` | Cudagraph capture + replay |
| `layertest.py` | Per-layer correctness |
| `test_custom_op.py` | torch.library custom ops |
| `test_compile_custom_op.py` | Compile + warmup |
| `test_fp4_roundtrip.py` | BF16 → NVFP4 → BF16 roundtrip |
| `test_interleave.py` | Gate/up weight interleaving |
| `test_interleave_gemm.py` | Interleaved GEMM correctness |
| `test_fused_step1.py` | Fused SwiGLU GEMM |

---

## Test Harness

Scripts in `tests/` for running tests on the B200 (`root@45.76.247.107`):

### `run_test.sh` — Run a test in a screen session

```bash
# On the B200:
cd /root/dsv4-nvfp4-workspace/kernel
bash tests/run_test.sh tests/unit/test_fmha_v3.py
```

What it does:
1. Kills any existing `kernel-test` screen and **SIGKILLs all child processes** (handles deadlocked GPU procs that ignore SIGHUP)
2. Deletes the old log file
3. Starts a new `screen -dmS kernel-test` running the test
4. Logs output to `/tmp/kernel-test.log`
5. Verifies the screen started

### `check_log.sh` — Check test progress

```bash
bash tests/check_log.sh
```

Shows the log contents and whether the screen is still running.

### Local → B200 workflow

```bash
# 1. Edit locally, commit, push
cd ~/dev/nvfp4-megamoe-kernel
git add -A && git commit -m "my change" && git push

# 2. SSH to B200, pull, run
ssh root@45.76.247.107
cd /root/dsv4-nvfp4-workspace/kernel && git pull
bash tests/run_test.sh tests/unit/test_fmha_v3_stage_c_full.py

# 3. Check results
bash tests/check_log.sh
```

### `fire_b200_test` — One-command local test runner

Lives in `~/.openclaw/workspace/fire_b200_test` (NOT in the repo — project-specific tooling).

```bash
# From your local machine, one command to push, run, and get results:
~/.openclaw/workspace/fire_b200_test tests/unit/test_fmha_v3.py
```

What it does:
1. Auto-commits and pushes any local changes
2. SSH to B200, pulls, starts `run_test.sh` in a screen
3. Polls every 15s until the screen exits
4. Dumps the full test log to your terminal

**This is strictly for the DSV4 NVFP4 kernel project.** It hardcodes the B200 IP, repo paths, and git remote.

---


## Stage C: Online Softmax — TMEM Layout Mismatch Issue

### Current Results (test_fmha_v3_stage_c.py)

| n | cos | Status |
|---|-----|--------|
| 128 | 0.973 | ⚠️ 3% error from TMEM layout mismatch |
| 256 | 0.793 | ⚠️ Two TMEM round-trips compound the error |
| 384+ | N/A | Pipeline doesn't cycle past 2 KV tiles |

### Root Cause: TMEM Layout Mismatch

The MMA instruction writes O to TMEM using the **C-fragment layout**. The `epilogue_tma_store` helper reads O from TMEM using `get_tmem_load_op`, which uses the **correct** C-fragment-compatible layout. **Raw PV output is perfect (cos 0.999998)** when `epilogue_tma_store` reads directly without any round-trip.

The problem appears when we do a **TMEM round-trip** (load O → modify → store back) using hand-constructed `Ld32x32bOp/St32x32bOp` atoms. These atoms use a different column mapping than the MMA's C-fragment layout, causing ~3% data corruption per round-trip. Both the NO-OP round-trip (previously used to "fix" layout) and the normalize round-trip (multiply by 1/row_sum) suffer from this error.

**Fix proven but not yet integrated:** The `epilogue_tmem_copy_and_partition` + `epilogue_smem_copy_and_partition` pattern from CUTLASS's `cutlass.utils.gemm.sm100` reads O from TMEM using the correct `get_tmem_load_op` layout and writes to SMEM using `get_smem_store_op`. This is a one-way trip (TMEM→reg→SMEM→GMEM) that eliminates the layout mismatch entirely. Integration requires proper `flat_divide` and `tma_partition` handling inside the kernel's warp-specific if blocks.

### Key Bug Fix: tOrP0 TMEM Column Offset (May 23)

The softmax warps store P at `tmem_p0_offset=32` FP32 columns (64 BF16 elements). PV MMA must read from the same offset. **`tOrP0` was missing this offset**, causing PV to read from TMEM column 0 (where S is) instead of column 32 (where P is). This was the root cause of NaN/zeros in D1 tests. Fixed with:
```python
if const_expr(self.tOrP0_offset > 0):
    tOrP0 = cute.make_tensor(tOrP.iterator + self.tOrP0_offset, tOrP.layout)
else:
    tOrP0 = tOrP
```
Must use `const_expr` conditional (not Python `if`) because CuTeDSL compiles both branches, and `tOrP.iterator + 0` fails with MLIR type error.

### Architecture (6-warp, current)

```
Warps 0-3: Softmax + Epilogue (row_max, row_sum, P store, O rescale, final normalize)
Warp 4: MMA (QK, PV)
Warp 5: TMA (Q/K/V load)
```

### TMEM Layout

```
Col 0-31:   S (QK acc, 128 FP32 via Ld32x32bOp Repetition(32))
Col 32-95:  P (64 FP32 via St32x32bOp Repetition(32), register bridge BF16 view)
Col 128+:   O (PV acc, 64 FP32, rescale via Ld32x32bOp Repetition(16))
```

### Remaining for Multi-Tile Production

1. **Fix TMEM layout mismatch** — replace hand-constructed atom round-trips with correction_epilog pattern
2. **Pipeline state cycling for n≥384** — kv_stage=2 can only buffer 2 tiles
3. **12-warp layout** — separate softmax/correction/epilogue warps
4. **O rescale for kt > 0** — must also use paired atoms or correction_epilog

---

## CuTeDSL Constraints (hard-won)

1. **`vectorize=True` loops: ONLY load/store/print** — no fmax, no cmpf, no inner loops, no carry
2. **`.reduce(cute.ReductionOp.MAX)`:** reduces ENTIRE C-fragment to scalar — global max, not per-row
3. **`cute.arch.fmax`:** impure for vectorizer — use plain `range()` loop
4. **TMA partition tensors have 4 modes:** `(((64,128),1), ?, KV_tiles, ?)` — `(None,0,None,0)` keeps mode 2 (KV tiles) free, `[None, kt]` indexes it
5. **`tBgK[(None, None, 0, 0)]` pins mode 2 to 0** — silently reads tile 0 forever. Use `(None,0,None,0)` instead.
6. **`softmax_done_bar` NamedBarrier is reusable** across tiles
7. **Hand-constructed TMEM atoms corrupt data on round-trip:** `Ld32x32bOp` + `St32x32bOp` built independently introduce ~3% error. Use `get_tmem_load_op` + `get_smem_store_op` paired atoms for one-way trips.
8. **CuTeDSL region isolation:** `flat_divide` and `tma_partition` can't be called inside `if warp_idx` blocks. Do partitioning outside `if` blocks or in regular (non-`@cute.kernel`) helper functions.
9. **`composition` vs `logical_divide`:** Both re-tile a tensor, but produce different layouts. The CUTLASS `correction_rescale` uses `composition`, `correction_epilog` uses `logical_divide`. The copy atoms must match the tensor layout they were created with.
10. **Variables in CuTeDSL `if` blocks are NOT visible in other `if` blocks.** Even when the condition is a compile-time constant (`self.use_smem_p`), CuTeDSL's MLIR lowering creates separate regions. Variables must be defined *unconditionally* before the first `if` that uses them. This applies across `if warp_idx == X` blocks, `for` loops, and nested branches. If a variable is set in `if not use_smem_p:` and read in another `if not use_smem_p:` inside a `for` loop inside an `if warp_idx < mma_warp_id:`, it won't be visible. Define all such variables before *any* branching.
11. **`tOrP0` MUST include the `tmem_p0_offset` column offset.** The softmax warps store P at `tmem_p0_offset=32` (FP32 columns = 64 BF16 elements). PV MMA must read from the same offset. Missing this causes NaN/zeros (MMA reads S from column 0, not P from column 32). Use `const_expr` conditional: `if const_expr(self.tOrP0_offset > 0): tOrP0 = cute.make_tensor(tOrP.iterator + self.tOrP0_offset, tOrP.layout) else: tOrP0 = tOrP`. Cannot use `tOrP.iterator + 0` (MLIR OpResult + int fails).
12. **LSE formula: `lse = ln(row_sum) + row_max * ln(2)`.** `row_max` is in the scale_log2 domain (`max(S * scale * log2(e))`). Multiply by `ln(2)` to convert to natural log domain: `attn_max = row_max * ln(2)`. So `lse = ln(row_sum) + row_max * ln(2)`. Verified: LSE err=0.000000.

---

## Key Lessons

1. **NEVER use `find_tmem_tensor_col_offset()` as TMEM placement.** It returns footprint size, not a safe offset.
2. **FMHA never trusts DLPack tensor layouts.** Reconstruct V as (hd, s_k) MN-major inside CuTe.
3. **TMEM allocation must be power of 2.**
4. **Square hides bugs.** (128,128) worked for every wrong approach. Always test non-square.
5. **St32x32bOp MUST use Float32**, NOT BFloat16. BFloat16 causes illegal memory access.
6. **First PV ACCUMULATE=False.** Otherwise adds uninitialized TMEM to output.
7. **FMHA P store uses QK C-fragment composition, NOT PV A-fragment.** Two aliases, same TMEM.
8. **Register bridge: FP32 backing (store partition) + BF16 view (QK-load layout).** Do not skip this.
9. **PRINT THE SHAPES. ALWAYS.** Reasoning about TMEM layouts without evidence is how we waste days.
10. **Never assume TMEM round-trips are safe.** Verify with NO-OP tests before adding logic.

---

## Stage D: Full Decode Attention (revised May 23)

### Key Insight: The Indexer Solves Paging Upstream

The indexer now hands the kernel `selected_kv: [T, top_k, head_dim] BF16` — a **dense, materialized, dequantized** K/V tile. FMHA sees a dense `[T, top_k, 512]` tile, exactly like Stage A/B's existing `k` and `v` inputs. **The kernel doesn't need to know it's sparse.** Paged TMA, scattered HBM reads, FP8 dequantization — all handled by `gather_selected_kv` upstream.

The SWA branch is the only "irregular" thing: it reads from the state cache's ring buffer with a position mask. SWA is small (`n_win=128` per query), so it's a separate fused branch with a sink-weighted merge.

**One FMHA kernel serves all three DSV4 attention types:**
- **CSA:** `compressed_kv` = top-k from indexer, `swa_kv` from cache → sink merge
- **HCA:** `compressed_kv` = all classical pool entries (gather-all mode), `swa_kv` from cache → sink merge
- **SWA-only (Flash layers 0-1):** `compressed_kv` = empty (`top_k=0`), only SWA runs. Sink merge degenerates to just `o_swa` after renormalization.

### Build Order

**D1 — Parameterize HEAD_DIM + SMEM-P** (~1 day, in progress)

Currently hardcoded at 64. Promote to constructor arg, thread through `_setup`. Test at 64, then 512 (DSV4's real value).

**Two P staging paths:**
- **TMEM-P** (hd≤64): P stored to TMEM via register bridge. PV reads from TMEM. Proven at cos 0.973.
- **SMEM-P** (hd>64): P stored to SMEM via PV A-operand layout. PV reads from SMEM. Avoids QK↔PV TMEM layout mismatch at large hd. **Register→SMEM copy needs `make_tiled_copy_C(store_atom, qk_mma)` to partition threads by QK C-fragment.** The SMEM rendezvous pattern: softmax writes P to SMEM at logical (row, col) addresses using `p_smem_s` layout, MMA warp reads from same SMEM. Barrier in between.

Risk at HEAD_DIM=512: TMEM column budget. `_setup` already does `find_tmem_tensor_col_offset(tOtO)` dynamically. Verify the total fits in 512 TMEM columns. If not, reduce `kv_stage` from 2 to 1 (lose K/V double-buffering) before sacrificing math.

Done when: identical result at HEAD_DIM=64 (regression), passes at HEAD_DIM=512 against FP32 oracle.

**D2 — Multi-query grid with head packing** (~1 day)

Grid changes from `(1, 1, 1)` to `(num_q_blocks, 1, batch)`. DSV4 is MQA — all `n_h=128` query heads share the same K/V. The query-head axis is folded into the M dimension of the Q tile: `M_tile = 128` covers `M = T * n_h` rows. At decode T is small (1-16), so packing heads into M fills the MMA. At prefill T=64, M is already 8192 with heads packed.

Done when: batch=4, T=64, n_h=128, num_kv_heads=1 produces correct attention against FP32 oracle.

**D3 — SWA sequence length mask** (~½ day)

The indexer's `top_k` is fixed (512 for Flash, 1024 for Pro). Compressed-K input is always `[T, top_k, head_dim]` with the same `top_k` at compile time.

What varies: the SWA window holds up to `n_win=128` tokens but starts with fewer. Add `swa_lens: [batch] int32` as kernel input. Mask SWA-branch logits to `-inf` where `swa_idx >= swa_lens[b]`.

Done when: batched input with varying SWA fill levels (some requests at position 50, some at 5000) produces correct masked output.

**D4 — Causal mask on SWA branch** (~½ day)

The compressed K the indexer selects is already from `s < floor(t/m)` (paper eq. 17). The indexer enforces causality at selection time. FMHA sees only causally-valid candidates. **The main path has no mask.**

The SWA branch needs a causal mask within the window. Add `is_causal: bool` constructor flag, apply `swa_idx > q_pos` masking to `-inf` in the SWA pass.

Done when: prefill mode produces correct output with the causal mask applied to SWA.

**D5 — SWA + sink merge** (~2-3 days) ← D5a+D5b DONE (May 23), D5c/D5d remaining

Per `dsv4/ops/decode_sparse.py`:
```
o = (exp(lse_sparse) * o_sparse + exp(attn_sink) * exp(lse_swa) * o_swa)
    / (exp(lse_sparse) + exp(attn_sink) * exp(lse_swa))
```

With un-normalized O (D5a): `o_unnorm = o_norm * exp(lse)`, so:
```
o = (o_unnorm_sparse + exp(attn_sink) * o_unnorm_swa)
    / (exp(lse_sparse) + exp(attn_sink) * exp(lse_swa))
```

**D5a DONE (May 23):** `normalize` flag added to FmhaKernel. When False, emits un-normalized O + LSE. LSE formula: `lse = ln(row_sum) + row_max * ln(2)` (row_max in scale_log2 domain, multiply by ln(2) to convert). LSE err=0.000000 verified.

**D5b DONE (May 23):** Python SWA+sink merge works end-to-end at hd=64. Run FMHA twice (compressed KV + SWA KV, normalize=False), merge in Python. Merge cos 0.961, individual attention cos 0.963/0.960.

Sub-steps remaining:
- **5c:** Fuse the two passes into one kernel launch. Q stays in SMEM, two MMA loops sequentially.
- **5d:** Fuse the merge into the kernel epilogue.

Done when: end-to-end kernel produces correct attention against FP32 oracle that does sparse+SWA+sink merge.

**~~D5 (old) paged TMA~~ — REMOVED.** The indexer + gather handles all paging upstream.

### Kernel Architecture (after D5)

```
Input: Q [T, n_h, 512], compressed_kv [T, top_k, 512], swa_kv [batch, n_win, 512]
       swa_lens [batch], sink_logits [n_h], request_ids [T]
  │
  ├─ Load Q to SMEM (once)
  │
  ├─ Loop 1: compressed KV (top_k tokens)
  │   QK → online softmax → PV → O_sparse, lse_sparse in TMEM
  │
  ├─ Loop 2: SWA window (n_win tokens, masked by swa_lens)
  │   QK → online softmax → PV → O_swa, lse_swa in TMEM
  │
  └─ Sink merge epilogue:
      O = (exp(lse_sparse) * O_sparse + exp(sink) * exp(lse_swa) * O_swa)
          / (exp(lse_sparse) + exp(sink) * exp(lse_swa))
```

### Reference Files

- Sink merge spec: `dsv4/ops/decode_sparse.py` (formula)
- SWA decode: `dsv4/ops/decode_swa.py`
- Attention reference: `dsv4/reference/attention.py`
- CSA attention: `dsv4/reference/csa_attention.py`

### Stage C Note

When implementing D5a, Stage C's epilogue changes from "multiply by 1/row_sum" to "emit un-normalized o + lse". Defer this until D5. Through D1-D4, keep Stage C normalize as-is and test as standalone dense FMHA.

---

## Stage E: Production Extraction (revised May 23)

### E1 — File placement

`dsv4/kernels/attention/fmha.py`. Currently contains `FmhaKernel` (migrated from test, hd=64 TMEM-P). Will gain parameterized `head_dim` and SMEM-P path in D1. Constructor takes all dimensions and dtypes, no module-level constants.

### E2 — Constructor signature

```python
class FmhaKernel:
    def __init__(
        self,
        head_dim: int,           # 512 for DSV4
        num_query_heads: int,     # 128 for Pro, 64 for Flash
        sliding_window: int,      # 128
        top_k: int,               # 512 (Flash) or 1024 (Pro)
        q_dtype=BFloat16,
        kv_dtype=BFloat16,
        o_dtype=BFloat16,
        qk_acc_dtype=Float32,
        pv_acc_dtype=Float32,
        is_causal: bool = False,  # affects SWA mask only
        cta_group: tcgen05.CtaGroup = tcgen05.CtaGroup.ONE,
        cluster_shape_mn: tuple = (1, 1),
    ):
```

All architecture-level shapes from config flow into the constructor. No FMHA-internal magic numbers.

### E3 — Call signature

```python
def __call__(
    self,
    q: torch.Tensor,            # [T, n_h, head_dim] BF16
    compressed_kv: torch.Tensor, # [T, top_k, head_dim] BF16 — from indexer gather
    swa_kv: torch.Tensor,        # [batch, n_win, head_dim] BF16 — from cache prep
    swa_lens: torch.Tensor,      # [batch] int32
    sink_logits: torch.Tensor,   # [n_h] FP32
    request_ids: torch.Tensor,   # [T] int32 — maps query to its SWA slot
    o: torch.Tensor,             # [T, n_h, head_dim] BF16 — preallocated
    stream: cuda.CUstream,
):
```

Notably absent: block_table, paged KV, inv_scale, FP8 dequant. All handled upstream.

### E4 — Kernel cache + warmup

Mirror `dsv4/ops/gemm_runner.py`'s `_compiled_kernel_cache`. Key on `(head_dim, num_query_heads, top_k, is_causal, ...)`. Pre-allocate at warmup, reuse at call. For DSV4, the cache has at most ~2 entries (Flash/Pro × causal/non).

### E5 — torch.library custom op

```python
@torch.library.custom_op("dsv4::sparse_fmha_with_swa", mutates_args=("o",))
def sparse_fmha_with_swa_op(
    q: torch.Tensor,
    compressed_kv: torch.Tensor,
    swa_kv: torch.Tensor,
    swa_lens: torch.Tensor,
    sink_logits: torch.Tensor,
    request_ids: torch.Tensor,
    o: torch.Tensor,
    runner_id: int,
) -> None:
    runner = get_runner(runner_id)
    runner._run_impl(q, compressed_kv, swa_kv, swa_lens, sink_logits, request_ids, o)
```

Mutates `o` (preallocated buffer). Consistent with cudagraphs.

### E6 — Reference parity hook

`dsv4/reference/attention.py` stays as the FP32 oracle. New test: `tests/unit/test_fmha_kernel.py`.

```python
def test_sparse_fmha_matches_spec(T=64, n_h=128, top_k=1024, n_win=128, hd=512):
    q = torch.randn(T, n_h, hd, dtype=torch.bfloat16, device='cuda')
    ck = torch.randn(T, top_k, hd, dtype=torch.bfloat16, device='cuda')
    swa = torch.randn(4, n_win, hd, dtype=torch.bf16, device='cuda')
    swa_lens = torch.tensor([128, 50, 128, 75], dtype=torch.int32)
    sink = torch.randn(n_h, device='cuda')
    req_ids = torch.randint(0, 4, (T,), dtype=torch.int32)

    # Oracle: pure FP32 spec
    o_sparse, lse_sparse = attention_with_lse_f32(q, ck, ck)
    o_swa, lse_swa = attention_swa_with_lse_f32(q, swa, swa, swa_lens, req_ids)
    e_sink = sink.exp()
    num = lse_sparse.exp().unsqueeze(-1) * o_sparse \
        + e_sink[None, :, None] * lse_swa.exp().unsqueeze(-1) * o_swa
    den = lse_sparse.exp() + e_sink[None, :] * lse_swa.exp()
    expected = num / den.unsqueeze(-1)

    # Kernel
    o = torch.empty_like(expected, dtype=torch.bfloat16)
    fmha = FmhaKernel(head_dim=hd, num_query_heads=n_h, sliding_window=n_win, top_k=top_k)
    fmha(q, ck, swa, swa_lens, sink, req_ids, o, stream=...)

    torch.testing.assert_close(o.float(), expected, atol=5e-3, rtol=5e-3)
```

### E7 — Cleanup

Delete all debug test files. `test_fmha_v3.py` becomes `dsv4/kernels/attention/fmha.py`. Only `tests/unit/test_fmha_kernel.py` remains as the attention test.

---

## Environment

- Server: root@45.76.247.107 (B200, 180 GiB HBM3e per GPU)
- venv: `source /root/dsv4-nvfp4-workspace/venv/bin/activate`
- PYTHONPATH: `/root/dsv4-nvfp4-workspace/kernel`
- Model: `/root/nvidia-meeting/DeepSeek-V4-Pro-NVFP4`
- vLLM repo: `/root/dsv4-nvfp4-workspace/vllm` (modified for Blackwell)
- CUTLASS FMHA reference: `/root/cutlass/examples/python/CuTeDSL/cute/blackwell/kernel/attention/fmha/fmha.py`
- Local CUTLASS clone: `/home/openclaw/dev/cutlass`